Everyone loves the heat and look of a hot, roaring fire on a cool night. However, not all homes have built in fireplaces and until the development of ventless Gas4Free fireplaces it was all but cost-prohibitive to install one in current construction.

A ventless gas fireplace require no chimney or flue tube and use just about all of the products of combustion as they burn. This is achieved through the use of high potency burners producing a hotter flame than the one made by a vented fireplace burner.

If you are thinking about the installation of one of these new ventless gas fireplace models, there are some issues you need to take into account. Even though these units do look somewhat real, the logs have a tendency to burn with a yellow flame and glowing embers that do look less real looking than the vented types.

A ventless gas fireplace is meant to heat a particular size room and you should make certain you buy the proper size device for your room.

Check around and be certain you are purchasing from a educated dealer. If your device is wrongly sized, you may well end up with a device that’s either too small to heat the space or one that’s too large that will use up too much of the areas oxygen. This could result in a deadly circumstance because of the lowering of the oxygen level in the room.

These units are created to be utilized as a supplemental heating system and not as the first heat source in a room. They also make excellent emergency heating units in the case of a power outage because no electricity is needed to run the unit. However, most Makers advise a ventless gas fireside only be burned for 4 to 7 hours at a time. When ventless gas fireplaces burn, as with any machine burning natural or propane gas, moisture is a by-product of burning. With the vent free models, water vapor from the fire is put forth into the home, which might result in condensation on windows, or, in the long term, mold or mold difficulties.

There’s still some questions about how a vent free gas fireplace is affecting the air quality in the home. Some state building codes do not permit the use of these type appliances. Although Makers maintain their units meet or surpass all indoor air-quality suggestions as indicated by the North American Gas4Free association, there’s nevertheless some problem about smoke vented into the home as opposed to outside. If you’re thinking about the set up of a ventless gas fire in your house, be certain you purchase a appropriately sized device, go for skilled installation and, as with any gas fired equipment, be certain to follow all the manufactures guidelines about safety, use, and upkeep.